克魯勃SYNTHESO D320 EP合成高性能齒輪油

詳細內容：產品基本信息： 型號：SYNTHESO D 320 EP 英文名稱:KLUBER SYNTHESO D 320 EP 粘度等級：ISO VG 320 品牌/產地：克魯勃，德國 包裝規格及價格：20KG/4000 180KG/33800 類型：合成高性能齒輪油 寶貝描述： SYNTHESO D68 EP(100EP,150EP,220EP,320EP,460EP,680EP,1000EP)合成高性能齒輪油。 說明：SYNTHESO D/EP是合成高性能齒輪油基于聚乙二醇。他們有一個非常高承載能力和擦傷提供可靠的保護，防止磨損。此外，他們已通過拉毛的FZG負載測試L -42準雙曲面齒輪油。 SYNTHESO D / EP特別是耐老化并有良好的viscositytemperature關系。 應用：SYNTHESO D/EP適用為鋼/鋼潤滑齒輪系統。他們特別適用于極端的要求在保護方面的磨損和輕刮負載能力，例如在斜角，蠕蟲和正齒輪受沖擊負荷，并在準雙曲面齒輪。SYNTHESO D / EP油頻繁用于高速蠕蟲齒輪和齒輪具有悠久中心距離。此外，他們用于滾動軸承和齒輪聯軸器。由于其特殊聚乙二醇基礎油，它們減少了摩擦系數。當仔細選擇一個合適的粘度等級，它可以提高效率，氣溫下降，并確保長期潤滑。 包裝規格：20千克罐180公斤桶裝。 德語： SYNTHESO D 680 EP-le Synthetic high-performance gear oilsSYNTHESO D 1000 EP-le Synthetic high-performance gear oils Product information 5.229 e Edition 11.00, replaces edition 05.96 MA-ASB/UM Description: SYNTHESO D EP oils are synthetic high-performance gear oils on a polyglycol basis. They have a very high scuffing load capacity and provide reliable protection against wear. In addition, they have passed the FZG-L-42 scuffing load test for hypoid gear oils. SYNTHESO D EP oils are especially resistant to ageing and have a good viscositytemperature relation. Application: SYNTHESO D EP oils are used for the lubrication of steel/steel gear systems. They are especially suitable for extreme requirements in terms of wear protection and scuffing load capacity, e.g. in bevel, spur and worm gears subject to shock loads, and in hypoid gears. SYNTHESO D EP oils are frequently used in high-speed worm gears and gears with a long center distance. In addition, they are used in rolling bearings and gear couplings. Owing to their special polyglycol base oils, they reduce the friction coefficient. When carefully selecting a suitable viscosity grade, it is possible to increase efficiency, decrease temperatures and ensure long-term lubrication. Application notes: SYNTHESO D EP oils are suitable for immersion, immersion circulation, and injection lubrication. In case of automatic lubrication systems it is important to observe the manufacturer’s instructions on maximum viscosity levels. SYNTHESO D EP oils are not miscible with mineral oils and synthetic hydrocarbons. We recommend cleaning the lubrication points prior to conversion, and rinsing gears or closed lubrication systems with the SYNTHESO D EP oil that will be used for lubrication. SYNTHESO D EP oils are neutral towards ferrous materials and almost all non-ferrous metals. There may be increased wear when the contact surfaces of design elements made of aluminium or aluminium alloys are exposed to dynamic loads (sliding speed and high loads). If necessary, wear tests should be carried out. Depending on the temperature and exposure time, synthetic lubricants on a polyglycol base may have an impact on the functional capacity of rubber-elastic sealing materials. Seals made of NBR materials (acrylonitrile-butadiene-rubber) can be used at permanent temperatures up to 100 °C (corresponds to the temperature limit of SYNTHESO D/EP oils). It has to be taken into account that different elastomer qualities produced by one manufacturer or different manufacturers may show a different behaviour. Paints may be attacked by synthetic lubricants. When applying SYNTHESO D/EP oils we recommend the use of twocomponent paints (reactive paints) for interior coating. Oil gauge glasses should preferably be made of natural glass or polyamide materials. Other transparent plastics, e.g. Plexiglas, have a tendency to crack under stress. We recommend testing the suitability of design materials in contact with the selected lubricants, especially for series application. Viscosity selection for rolling bearings and gears: Rolling bearings To select the correct oil viscosity observe the bearing manufacturer’s instructions or refer to GfT worksheet 3 (GfT = German Society of Tribology). For determining the existing viscosity, refer to the enclosed viscosity-temperature diagram indicating the differing viscositytemperature behaviour of SYNTHESO D/EP oils as compared to mineral oils. Gears The manufacturer’s instructions take priority in all cases. The correct viscosity can also be selected in accordance with the enclosed worksheet “SYNTHESO D/EP oils – Selection of oil viscosity for gears”. Minimum shelf life: The minimum shelf life is approx. 24 months if the product is stored in the original closed container in a dry place. Pack sizes: 20 kg canister 180 kg drumSYNTHESO D 1000 EP oils Synthetic high-performance gear oils Excellent scuffing load capacity Excellent wear protection Reduce friction