進口高壓小型阻火器

詳細內容：概述Summary 進口高壓小型阻火器一般采用不銹鋼作為閥體和阻火層材質，鍛打制造，耐高溫高壓，應用火焰通過熱導體的狹小孔隙時,由于熱量損失而熄滅的原理設計制造，阻止火焰蔓延的裝置。廣泛應用于可燃氣體管道，如汽油、煤油、輕柴油、笨、甲笨、原油等油品的儲灌或火炬系統、氣體凈化通化系統、氣體分析系統、煤礦瓦斯排放系統、加熱爐燃料氣的管網上、也可用在乙炔、氧氣、氮氣、天然氣的管道用品。 High pressure small flame arrester using stainless steel as the body and the fire resistant layer material, forging manufacturing, high temperature and high pressure, and application of flame through narrow pore heat conductor, because the heat loss and out of the principle design and manufacturing, device to prevent the spread of flame. Widely used in combustible gas pipeline, such as gasoline, kerosene, light diesel oil, benzene, toluene, crude oil storage tanks or torch gas purification system, Tonghua system, gas analysis system, coal mine gas drainage system, heating furnace fuel gas pipeline network, and can also be used in acetylene, oxygen, nitrogen, natural gas plumbing supplies. 參數Parameters 公稱壓力： PN16、PN32、PN40、PN50Mpa Nominal pressure: PN16, PN32, PN40, PN50Mpa 公稱通徑：DN3～DN50 Nominal diameter: DN3 ~ DN50 焊接管外徑Welded pipe diameter ∮10，∮12，∮14，∮16，∮18，∮20，∮22，∮25，∮28，∮30，∮32，∮40，∮42，∮50，∮57 適用介質：加壓天然氣CNG﹑煤氣、沼氣等 Suitable medium: CNG, water, gas etc. 適用溫度：-20℃～+120℃ -70℃～180℃等 Applicable temperature: -20℃～+120℃ -70℃～180℃ 制造材料：20#﹑1Cr18Ni9Ti﹑304﹑316﹑316L﹑12Cr1Mov等 Material: 20#, 1Cr18Ni9Ti, 304, 316, 316L, 12Cr1Mov etc. 業績Performance 中國石油天然氣集團公司，深圳空港油料加氣站，北京市燃氣集團有限責任公司，重慶燃氣集團，河南藍天燃氣股份有限公司，新疆燃氣(集團)有限公司，成都城市燃氣有限責任公司，太原煤炭氣化(集團)有限責任公司，新疆廣匯實業股份有限公司等。